Department of Mechanical Engineering

Department of Mechanical Engineering

International

  1. Hussain H, Rathore P.S., Experimental Analysis of TIG Welding Joint for Copper, SVNIT, Surat, International Conference, P 868, 6-8 June 2011.
  2. Hussain H., Shekhawat S., Husain M., “Meteorological Efficient commissioning of Salt Gradient Solar Pond”, International Journal of Applied Solar Energy, ISSN 0003-701X,Vol. 48, No. 3, Allerton press, Inc., pp180-185, October,2012
  3. Patil S.L., Diware V.R., Hussain H., Carbon Credits Gains Due To Reuse of Flyash In Concrete Technology,International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, Vol. 2 Issue 2, February- 2013.
  4. Hussain H., Khandwawala A.I.,”Optimal design of two feeder system: Simulation studies for techno-economic feasibility” American Journal of Engineering Research (AJER), Vol. 2, Issue 10, PP 214-221, Nov. 2013.
  5. Hussain, A.I. Khandwawala, “Application of transient thermal analysis for three feeder design optimization for sand casting”, International Journal of engineering and technology (IJMET), Volume 4, Issue 6, pp. 241-248 ,November – December,2013
  6. Haider Hussain, “Metal Casting-A review work”, Int. Journal of Engineering Research and Applications www.ijera.com ISSN : 2248-9622, Vol. 4, Issue 1( Version 3), pp. 37-40, January 2014.
  7. Hussain, A.I. Khandwawala, “Optimal design of feeders for LM06 in Sand Casting: Comparative analysis for small, medium and large size dumbbell casting”, International Journal Of Research In Aeronautical And Mechanical Engineering, Vol 2 Issue 6,pp.55-62, June 2014.
  8. Hussain, A.I. Khandwawala, “Optimal Design of Feeder for Sand Casted Steel Dumbbell: Simulation Studies for Techno-Economic Feasibility”, American Journal of Mechanical Engineering, Vol. 2, No. 3, pp. 93-98, July 2014.
  9. S. Rathore, H. Hussain, Entrepreneurship Steady In Engineering- A Review, International Conference “Empowerment thnterprenurship- next agenda to BRICS” 3,4 Feb 2017, Mandsaur University Mandsaur (M.P.).
  10. Ashish Sethiya, “Electric Vehicles In India: Challenges & Opportunities”,InternationalJounal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 10, page no. pp 699-702, October-2018, Available at : http://www.jetir.org/papers/JETIR1810503.pdf (2018)
  11. Ashish Sethiya, Paper published in VSRD International Journal of Electrical Electronics & Communication Engg. (ISSN: 2231-3346) (Vol: 5, Issue: 2) on the topic ‘Designing and cost analysis of solar PV power plant in commercial building’. (2015)
  12. Ashish Sethiya, Paper published in IJIET (ISSN: 0974-3146) (Vol:7, Issue:1) on the topic ‘Utility saving opportunities in a solvent extraction process’. (2015)
  13. Ashish Sethiya, Attended International Seminar on “Sustainable & Renewable Energy Resources for Engine Technologies” under TEQIP-II at Govt. Women Engineering College, Ajmer (Raj.). (2015)
  14.  Ashish Sethiya, Paper published in IJERT (ISSN: 2278-0181) (Vol:3, Issue:12) on the topic ‘Designing and cost analysis of  Solar PV power plant in commercial building’. (2014)
  15. Ashish Sethiya, A Book Published on Cooling Load Reduction Techniques in Buildings: A Software approach of Design Builder”, by LAP Publication House, Saarbrücken, Germany. (2012)
  16. Gugliani G.K., A. Sarkar, S. Mandal, and V. Aggrawal., “Location Wise Comparison of Mixture Distributions for Assessment of Wind Power Potential: A Parametric Study”, International Journal of Green Energy, 14 (9), 2017, 737-753
  17. Gugliani, G., S.K. Pal, A. Sen, B. Prasad, Development of a Zirconia-Graphite Refractory for a SEN Application, Interceram, 63 (3), 2014, 136-139.
  18. Gugliani G.K., A. Sarkar, A. Gupta, S. Mandal, Prince., “Determination of cyclonic factor in different wind zones of India”, 9 thAPCWE 2017, Auckland, New Zealand, 2017
  19. Sarkar A, G.K. Gugliani, V. Aggrawal., “Wind Climate Modelling of India for Specification of Design Wind and Fatigue Load”, 14th International conference on Wind Engineering; Porto Alegre-Brazil, 2017
  20. Sangewar Ravi Kumar, “Study and Analysis in Heat Transfer Enhancement of Solar Collectors Using the Tape Inserts ”, International Conference on Science 27th July 2019
  21. Pushpraj Singh Rathore , Nagendra Sharma, “A Review on   Thermal & Mechanical Analysis of Welding Joints”, Journal of Emerging Technologies and Innovative Research (ISSN-2349-5162), March 2019, Volume 6, Issue 3.

National

  1. Hussain H, Mathure P., Minimization of slug inclusion and end crater in arc welding through optimum parameters, FRIT Vashi Navi Mumbai,National conference proceeding NCNTE,PP 10-13, February,25-26, 2010.
  2. Hussain H, Mathure P., Analysis of arc welding through experiment and FEM for optimum parameters, University Polytechnic, Aligarh Muslim University, National conference proceeding NCAME,PP 45-50, November 27-28,2010.
  3. Hussain H., Kumawat M., Transient thermal analysis of brick shape casting, Mangalyatan University, Aligarh, National Conference,P 13, 20-22 January 2012.
  4. Hussain H., Rathore H. S., Heat Flow Analysis of HSS Tool for Mild Steel Work Piece on Conventional Lathe Machine, National conference at SVNIT, Surat,p-,26-27 June 2012.
  5. Hussain, Patidar D., Prajapati N.K., “Analysis of Material Removal Rate with the help of Genetic Algorithm”, National Conference on Advances in Mechanical Engineering, MIT, Mandsaur, 26 – 27 Nov. 2012.
  6. Gupta A., Khan Khiza, Hussain H., “Design & Fabrication of Dynamic Vibration Absorber with Damper”, National Conference on Advances in Mechanical Engineering, MIT, Mandsaur, 26  – 27 Nov. 2012.
  7. A Sethiya, H. Huusain, S. porwal, Die Casting Process Modeling, Journal of applied engineering (JOAE), 3(10) October 2015 volume III Issue X.
  8. H.Hussain, A Solidification Study of Cube Shape Casting, Journal of Emerging Technologies and Innovative Research (JETIR), Volume 5, Issue 10, PP17-21, October 2018.
  9. Ashish Sethiya, Paper presentation in National conference on “Energy Scenario in India” organized by Oriental Institute Of Technology, Bhopal.
  10. Ashish Sethiya, Attended One Week STTP programme on “Effective Teaching” organized by National Institute of Technical Teachers’ Training And Research, Kolkata. (2019)
  11. Gugliani G.K., A. Sarkar, C. Ley, and S. Mandal, “New Methods to Assess Wind Resources in Terms of Wind Speed, Load, Power and Direction.” Renewable Energy, 129 (A), 2018, 168-182.
  12. Sarkar A., G.K. Gugliani, and S. Deep, “Weibull Model for Wind Speed Data Analysis of Different Locations in India.”, KSCE Journal of Civil Engineering, 21 (7), 2017, 2764-2776
  13. Gugliani G.K., A. Sarkar, S. Bhadani, and S. Mandal, “A Novel Approach for Accurate Assessment of Design Wind Speed for Variable Wind Climate.”, KSCE Journal of Civil Engineering, 23 (2), 2019
  14. Sangewar Ravi Kumar, “Modification in Stacks Design for the Integrated Incinerator-Fired Heater System Using CFD”, Journal of Thermal Engineering and Applications.
  15. Sangewar Ravi Kumar, “Design, Development on Solar Adsorption Desalination & Cooling System” (201941025201), Patent, filed and published in July 2019.
  16. Sangewar Ravi Kumar “Study and Analysis in Heat Transfer Enhancement of Solar Collectors Using the Tape Inserts” International Conference on Science, Engineering & Technology(ICSET-19) 27th July 2019
  17. Sangewar Ravi Kumar “Effect of the absorber plat groove roughness on performance of solar air heaters” Journal of Refrigeration, Air conditioning, Heating and ventilation vol 7 No-2 Pp12-21